Rivertrace Ltd
|
Rivertrace produces a range of products that meet and exceed the I.M.O. resolutions MEPC 107(49) and MEPC 108 (49) relating to water discharges from ships.
Sinco Automasi Sdn Bhd has been appointed as Rivertrace’s Agent specifically in Marine market for the product as follows: |
|
 |
|
 |
| |
Smart Cell Bilge Alarm – OWS 15PPM
The Rivertrace Smart-Cell Bilge Alarm meets the requirements of MEPC 107 (49) for the monitoring of three oil types: fuel oil, diesel and emulsions. By simple operation of the manual clean device, the Smart-Cell remains in optimum operating condition.
- Bilge Water Discharge
- Rig Slop Tank Discharge
- Air Cooler Drains Overboard Discharge
- Oily Water Separator Discharge
- Oil range: 0 - 40 ppm
|
|
 |
|
|
| |
 |
|
Smart ODME
The Oil Discharge Monitoring Equipment (Smart ODME) has been designed to provide means of monitoring, recording and controlling the ballast discharge in accordance with the requirements of MEPC 108(49). Discharge limits are set at 30 litres per nautical mile, and the total discharge is expressed as a proportion of the previous cargo for dirty ballast.
- Dirty Ballast Water Discharge
- Clean Ballast Water Discharge
- Bio Fuel Approved
- Easy Installation
- Oil measurement range: 0 - 1000 ppm all types
|
|
|
| |
OCD 50M Boiler Condensate
The OCD 50M is Type Approved by DNV-GL for marine use. A monitor designed to cater for the special conditions associated with high sample temperatures. This unit will detect oil in much smaller quantities with great reliability and repeatability.
- Hydrocarbon Leak Detection
- Lube Oil Cooler Monitoring
- Boiler Feed Protection
- Produced Water Reuse - RO Feed Water, Steam Generator Feed Water
- Heat Exchanger Leak Detection
- Range : 0-10ppm (Condensate) or 0-200ppm (Cooling Water)
|
|
 |
|
|
| |
 |
|
Smart 50M
A versatile and sophisticated monitor to suit multiple applications in marine and industrial environments. The Smart 50M uses a nephelometry based detection technique and uses sophisticated algorithms to detect Oil and suspended solids in the sample.
- Hydrocarbon Leak Detection
- Lube Oil Cooler Monitoring
- Boiler Feed Protection
- Produced Water Reuse - RO Feed Water, Steam Generator Feed Water
- Industrial Wastewater/Groundwater discharge
- Range : 0 – 10ppm / 0 – 200ppm / 0 – 3000ppm
|
|
|
| |
OCD XTRA Oil In Water Monitor
The “OCD Xtra” combines multiple light wavelengths with multiple sensor technology, to measure oil accurately in the range 0-200 ppm, even in the blackest of produced water.
Multiple oil types are automatically compensated for by sophisticated algorithms. The multi – parameter display shows the sample’s oil content, pressure and a Graphical average of the last 4 hours oil readings. The last 7 days readings are stored in ROM and can be accessed from the help menu.
The OCD Xtra has the ability to adjust the calibration settings against laboratory analysis on site. Full on screen help is available to guide the operator during set-up and maintenance routines.
- FPSO/FSO/FSU Produced Water Discharge
- Drilling and Production Rig Slop Tanks/Deck Drains
- Oil/Water Separator discharge
- Re-injection or Water Flood Water Quality Control
- Process Control
- Produced Water Reuse – RO Feed Water
- Industrial Wastewater Discharge
|
|
 |
|